How to Install Solar Inverters to Store Energy in Your PV Cells?

When it comes to install solar panel in your home, solar inverters play a major role. In order to fully power up your home with Duurzame stroom, you have to connect four components altogether – charge controller, solar panel, inverter and batteries. Charge controller is required to avoid battery to get overloaded. Inverter is required to transform DC into AC (direct current into alternating one). This is so because most home and kitchen appliances are AC powered. On the flip side, batteries and solar panels give the output in DC.

1.      Connect all the four components altogether and make sure batteries can match with voltage output. Connect 2 panels of same group to get double voltage output in series with same current. Wire two solar panels of same group for double current in parallel in same voltage. Determine the voltage output for batteries and solar panels to ensure matching them before you Aanschaf zonnepanelen. Also ensure that ratings for both inverter and charge controller are similar to the voltage for battery bank and panel array before you buy anything.

2.      Connect both negative and positive outputs of the array of solar panels to the negative and positive inputs to charge converter. Charge controller or negative and positive outputs are connected to the battery bank’s negative and positive terminals respectively.  

3.      Connect inverter’s negative and positive inputs with the battery bank’s negative and positive terminals. Make sure inverter’s outputs are directly connected to the wiring of house. Make sure voltage outputs of solar panels, batteries, current controller and inverter are matching.  You can wire batteries and solar panels in sequence to bring up proper networks to desired voltage. If you want to generate more energy than your requirement, then you can opt for devices that can help generate extra energy on grid and you can get royalty from the electricity company for it instead of power bill.

Tips & Suggestions

·         According to the state where you live, the excess energy generated from your device you want to sell to utility company will vary. So contact your nearby electricity company because in some states these devices are available at no cost and you may get assistance for installation in some states.

·         For a specific house, calculating the total requirement of energy is a daunting task. So it is best to search for the same family or house and go as per their specification in the beginning.

Visit imp-company if you are seeking to Aanschaf zonnepanelen or if you want to know more regarding Duurzame stroom.